GUITAR

DIVINITY
DIVINITY 12
MAG-V412
MAG-H412
MAG-G412



                    Click to view multiple images
100 watt all tube 2/3 channel amplifier with spring reverb, tube boost, effects loop, crystal clear clean channel and extremely meaty gain channel. The attack and smoothness in over all tone is simply unmatched. 

The Divinity utilizes four Electro Harmonics EL34 power tubes, two 12AT7 and two 12AX7 pre amp tubes. It’s a high gain amp with the ability to range in distortion from all out death metal to over driven blues. It has twin gain channels. Edge 1 is designed more for rhythm for that defined and harmonic attack. Edge 2 is dipped slightly in the mid and high end EQ range giving it sort of a neck pickup tone where solos are smooth and notes blend together better.

The clean channel is a sparkling feature, it stays perfectly clean even at extremely loud volumes and with any pickup choice you have in mind. The tube boost is used in the clean channel mode, it simply ads a little dirt to the sound, sort of a naturally over driven tube tone (great for blues).

The EQ section for both clean and distortion channels are set with perfection in mind. The lows are deep and smooth without being to punchy so they are clean lows. The mids have the ability to sound squished or run up to very defined sounding without being “boxy” sounding. The highs are designed to do as they should and attain great harmonics without being overly bright.

Over all the EQ is designed to adjust to any tone you desire without having to have shapes, contours, presence controls or a bunch of little frequency switches to confuse you. The sound of the amp would best be described as thick, defined, extremely versatile and full of precise attack. 

See and Hear it now (click one of the links below)

http://www.youtube.com/watch?v=LWO1f1jLz5o (Santiago Dobles)

http://youtube.com/watch?v=QLnJt-Y7LAE  (Santi in the studio)

http://youtube.com/watch?v=z8ne5Az0Af8 (Danny Hayoun) Metal

http://youtube.com/watch?v=12oDrUFRM2g (Danny Hayoun) Clean

http://youtube.com/watch?v=W5yNXTg-tRg (Danny Hayoun) Blues

http://youtube.com/watch?v=nyBMBus3Yi4 (Danny Hayoun) Jazz

 

 

 

  • Electro Harmonix EL34 Power Tubes
  • Electro Harmonix 12AX7 and 12AT7 Preamp Tubes
  • Triple speaker outputs (4, 8 or 16 ohm selectable)
  • Effects Loop with Level Switch
  • Spring Reverb
  • Foot Switch
  • Tube Boost
  • 4 Pin Foot Switch included (Gain, Clean, Boost, Reverb)
  • High Quality Construction, durable for road use

 

Power Tube Options

 We have 3 types of power tubes available for the Divinity and head. The Electro Harmonix EL34 tubes are stock in the Divinity head. For an added price, these options are available:
EL34:These stock tubes in the Divinity amplifier are preferred by many as a good all around tube for many styles of music. EL34 tubes have sort of a grainy tone on the top end. That’s really the main difference between it and a 6L6 tube or at least that is the most obvious difference. 
J&J 6L6GC:These are hands down, the best quality tube on the market in our opinion. You won’t hear much difference between this tube and the 6L6GC Electro harmonix but it is a longer lasting, better quality tube. However, they are pricey. Your upgraded price will be $50 added to your dealer, customer or endorsement order. 
Ruby 6L6GCMSTR:
This is an amazing tube! If your into mids that cut through unlike anything you have ever heard, these are the way to go. Using an EQ pedal to boost when switching from rhythm to lead is a thing of the past. These tubes are chunky, tight and very quality. We have seen them last for years. Your upgraded price will be $50 added to your dealer, customer or endorsement order.

Preamp Tube Options 

We can offer preamp tube changes but honestly, your not going to hear much of a difference and your quality isn’t going to improve any. Using the same brand names listed above and utilizing the same models in our amps that are used presently your upgraded price will be $30 added to your dealer, customer or endorsement order. We can not change the 12AT7 pre amp tubes to 12AX7 tubes. Just so YOU know the TRUTH, 12AT7 tubes have more gain than a 12AX7. However, the 12AT7 pre amp tubes in our amps are NOT used for the gain channels so it wouldn’t mater anyway. 

Of course we will bias the amp for you with your option. If you decide to change tubes on your own, use the settings below. The lower you set the tube bias, the longer it will last in most cases. However, you might sacrifice some tightness in tone as well as power. You’ll never get less than 100 watts but you could get as high as 130 watts out of your Divinity head. 
o EL34: 35-40mv per tube (70-80mv per outside pin)
o 6L6GC or 5881: 40-45mv per tube (80-90mv per outside pin)
o Ruby 6L6GCMSTR: 50-60mv per tube (100-120mv per outside pin)