Countless hours of design work have gone into the Divinity II amplifier. Many people ask "hey this looks like a Metal amp". Well we are not going to deny that it will go "balls to the walls man"... and attack like no other with massive definition and distortion. However, it has one of the sweetest sounding clean channels your ever gonna hear and for blues drive.... well your just going to have to give it a try and see for yourself. rest assured, you will be pleasantly surprised. It offers a smooth creamy tone naturally or you can kick it up a notch and barrel down on some nasty, fully sustained rock blues driving notes that you'll thirst to play over and over again.

  • Master Shape Control--- This circuit works in every channel as a master control to allow the guitarist to sweep from focus on the lower mid frequencies to the opposite side focusing on the higher mid frequencies. Its a subtle control but as you may already know, good tone is all about those subtleties.

  • Clean Channel--- The clean channel is something to behold. Few amps will stay clean like the Divinity II at loud volumes. You can put the master on 10 and STILL have clean without breakup. The EQ circuit is perfectly voiced for a very rich and full tone.

  • Gain Channels--- The Divinity II has 2 gain channels. Each have they're own EQ and level controls. Gain 2 rolls back the high frequencies and pulls up the bottom end perfect for solos. Gain 1 focuses on extremely defined mids that cut like no other. Its not just the Clipping circuit that gives the Divinity its unique definition. The EQ circuit for the gain channel has always been a major point of interest in its design. Finding the perfect low / mid and high circuits really nailed down the tight response and deep low end that doesn't "fart" out or make it sound like a box. We also do something very special with or gain circuit and the second 12AX7 tube in the pre amp stage. This little circuit is the key factor in the Divinity's sharp, cutting attack.

  • Tubes--- The Divinity 3 comes with EL34 power tubes. There is an option to switch out to Ruby 6L6GCCZ/JJ power tubes if desired. The EL34 tubes present a little more gain, more top end clarity and deeper bottom end. Where as the 6L6GCCZ tubes add tons of mid range definition, tightness and thickness.

FULL IMAGE FRONT

FULL IMAGE BACK

SOUND CLIPS <---click here

 

KEY FEATURES

·               Electro Harmonics EL34 power tubes

·          Built in the USA

·          2 High gain channels with separate EQ and level controls

·          Master Shape control

·          Spring Reverb

·          Clean channel that STAYS clean at loud volumes

·          Effects Loop with send and return level controls

·          Hyper LED light for totally silent operation

·          High performance, quality made transformers that last forever

·          3 year warranty

 

POWER OUTPUT -- -- 120 watts
POWER TUBES -- -- 4 Electro Harmonics EL34
PRE AMP TUBES -- -- 4 Electro Harmonics 12AX7 & 12AT7
CHANNELS -- -- 3 independent
SPEAKER OUTPUTS -- -- 4 / 8 /16 Ohm ability
FOOTSWITCH -- -- 5 pin footswitch Included with every amplifier
WEIGHT & DIMENSIONS -- -- 55LBS    27W" x 10D" x 10.5H"
VOLTAGE -- -- 120V OR 240V switch able